Stop rebuilding for every charger — just change the settings
A configurable charging-control HMI where battery chemistry, cell count, capacity, and charge profiles are set right on the screen. Covers 12V to 96V, from lead-acid to lithium, with a single profile.
How this HMI works
Voltage, current, power, and SOC are shown as large numbers with donut gauges and real-time graphs, while the charge stage (bulk → absorption → done) is indicated by color. Select a chemistry and the charge curve, stages, defaults, and alarm thresholds adjust automatically.
Key features
Configurable profiles
Set, save, and recall chemistry, cell count, capacity, and voltage/current.
Multiple chemistries
Supports lead-acid (PzS · AGM · GEL), LiFePO4, Li-ion (NMC), and NiCd.
Per-cell voltage scaling
Covers 12 to 96V with a single profile via VPC × series count.
Multi-stage charging
Supports CC-CV (lithium), IUIa/IUoU (lead-acid), temperature compensation, and safety timers.
Diagnostics · alarms
Manages voltage, current, SOC, SOH, temperature, BMS limits, and 19 fault types.
Two-tier access
Separates operator (monitoring · start/stop) from installer (parameters · PIN).
Browse the screens
Actual screens designed and built in-house by EdgenomiX.
* These are actual production screens; the configuration may vary depending on the deployment environment.
What you monitor and control on screen
How it connects to your equipment
Every EGNOX custom HMI supports Wi-Fi and Ethernet networking, OTA wireless firmware updates (signature verification · rollback), remote screen viewing via web browser, and multilingual operation (Korean/English) as standard. The communication register map is configured to match the equipment model during the screen-design stage.
Where it is applied
Common HMI hardware platform
| Display | 7″ IPS 1024×600 · capacitive multi-touch |
|---|---|
| Processor | ESP32-P4 dual-core RISC-V + ESP32-C6 wireless |
| Memory | 32MB PSRAM · 16MB Flash |
| Serial | RS-485 · RS-232 |
| Network | Wi-Fi (2.4GHz) · Ethernet (100M) |
| Remote | OTA firmware updates (signature verification · rollback) · web remote screen viewing |
| Operation | Multilingual (Korean/English) · NTP clock · persistent settings storage |
| UI | LVGL-based graphics · IEC 60073 color standard |
* The specs above are based on the common EGNOX custom HMI platform; screen size, communication, and form factor are selected and agreed upon according to project requirements.
Energy HMIs, built to fit your equipment
Tell us your equipment type, communication method, and the screens and features you want, and we will first review feasibility along with a rough cost and schedule.